Module 4 · Lesson 5 of 6 · 3 minutes
Charging and battery replacement
Flat batteries are the most common reason a hearing aid "stops working". Learn how to keep rechargeable and battery hearing aids powered, and how to handle batteries safely.
Rechargeable hearing aids
- Place them in the charger every night. Make sure they click into place and the charging light comes on, as described in the user guide.
- Check the charger is plugged in and switched on at the wall.
- A full charge usually lasts a whole day. If it runs out early, the battery may be wearing out. Contact the supplier.
- Keep the charger clean and dry, and do not swap chargers between residents.
Battery hearing aids
Hearing aids use small zinc-air batteries. Sizes are colour-coded:
- 10 yellow, 312 brown, 13 orange, 675 blue
Use only the size the hearing aid needs. It is written in the care plan, on the battery packet or in the user guide.
Changing a battery
- Open the battery door and remove the old battery.
- Peel the sticky tab off the new battery. Many manufacturers advise waiting about a minute before inserting it, to let air activate the battery.
- Put the battery in with the flat side marked “+” lined up with the “+” marking on the battery door.
- Close the door gently. Do not force it; if it will not close, the battery is probably upside down.
- Check the hearing aid works.
- Dispose of the old battery safely, out of reach of residents.
- NHS hearing aid batteries are free. Ask the NHS audiology service how to get them: many send them by post or have local collection points.
- Keep spare batteries in their packet, in a safe, cool, dry place.
- Open the battery door at night.
Check your understanding
Your answers are not recorded anywhere except, if possible, on this device.
Clinical review: pending — drafted November 2026 from the references listed. Awaiting review by a qualified audiologist.