Module 5 · Lesson 1 of 5 · 3 minutes

The four-step check

Most hearing aid problems can be solved in a couple of minutes by checking four things in order. Remember them as Power, Path, Placement, Person.

When a resident’s hearing aid “isn’t working”, the cause is usually simple. Working through four checks, in order, solves most problems and tells you who to contact if it does not.

1. Power

  • Battery aids: fit a new battery of the correct size, + side matching the + mark. Many manufacturers advise waiting about a minute after removing the tab.
  • Rechargeable aids: check the charger is plugged in and switched on, the aid sits properly in it, and the lights show charging as described in the user guide.

2. Path

Sound travels from the speaker to the ear through a tube and earmould, or through a dome or wax filter. Check for:

  • wax in the earmould, dome or filter
  • water droplets in the tube
  • squashed, split, hard or yellow tubing

3. Placement

  • Is it the right aid in the right ear? (Red = right, blue = left.)
  • Is it fully inserted? A loose earmould or dome often causes whistling.
  • Is anything pressing on it, such as a hat, headrest or pillow?

4. Person

  • Does the ear look sore, red or swollen, or is there discharge?
  • Is there more wax than usual on the earmould or dome?
  • Has the resident’s hearing changed, especially suddenly?

You can try the full interactive troubleshooter in the last lesson of this module, or any time from Quick Help.

Check your understanding

Your answers are not recorded anywhere except, if possible, on this device.

What are the four steps of the hearing aid check, in order?
Which of these is NOT part of a safe troubleshooting check?

Clinical review: pending — drafted November 2026 from the references listed. Awaiting review by a qualified audiologist.